if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
1/4 x 60 in Kobra 1-Piece High Pressure Charging Hose With Secure Seal Fitting
JUST-BETTER CLS-60Y KOBRA 60" YELLOW HOSE ONLY
Refrigerant Hydraulic Hoses
}
Brand: 
1/4 x 60 in Kobra 1-Piece High Pressure Charging Hose With Secure Seal Fitting
3329567
MFG #: CLS-60Y
Product ID:3329567
Famous Supply
- Color: Yellow
- Series: CLS
- Type: 1-Piece
- Nominal Size: 1/4 in
- Length: 60 in
- Working Pressure: 800 psi
- Material: Kevlar®
- Domestic/Import: Domestic
CLS Series hoses feature a secure seal fitting that opens to full flow. The revolutionary patent-pending design on our internal structure significantly reduces blowouts, provides maximum flow and automatically traps refrigerant discharge in the hose. JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts. Pressure rating 800 psi and 4,000 psi burst. These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia. As always, Kobra® hoses are made in the USA.
- Features
- Standards & Approvals
| Gasket feature a hood with a straight edges that snaps into the straight edges of the barb and straight edges to straight edges force eliminate gasket blowouts |
| Depressor is barbed and locks into the gasket, meaning the outward force on the depressor pushes the gasket further into place, resulting in no blowouts |
| Kobra® high pressure hoses are made from Kevlar®, the same material that stops bullets in bullet-proof vests |
| Kevlar® makes our hoses incredibly strong and flexible, Kobra® hoses feature a nitrile cover which is better than neoprene because it is more resistant to oils, giving the hoses a longer life |
| 800 psi working, 4000 psi burst pressure |
| 5 to 1 safety factory (beat industry standard of 4 to 1) |
| Use rebuild kit 33112RK, P90022 replacement O-ring |
| Stainless steel thrust washer insures free rotation even under high pressure |
| Three points contacts on depressor |
| JB also uses a common crimp that grips the full circumference of the hoses yielding a maximum hold and uniform seals that prevents leaks and burst |
| Suitable for R-410A and can be used with all common refrigerants except ammonia |
| Low loss fitting adapter available |
| UL Listed |