if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
2 NFI Cast Iron 1/6 hp 3-Piece Circulator Pump w/ Flanges
B&G 102214 2-NFI 1/6-HP IRON BODY CIRCULATOR W/FLANGES
Hydronic Circulating Pumps
}
Brand: 
2 NFI Cast Iron 1/6 hp 3-Piece Circulator Pump w/ Flanges
555643
MFG #: 102214
Product ID:555643
Famous Supply
- Amperage Rating: 1.9
- Dimensions: 16-5/8 L x 8-1/2 H in
- Frequency Rating: 60
- Impeller Type: Phenolic
- Maximum Head: 10 ft
- Maximum Pressure: 125 psi
- Motor Speed: 1725 rpm
- Mounting Type: Flange
- Power Rating: 1/6 hp
- Series: 2
- Temperature Rating: 225 deg f
- Type: Single Speed, Cast Iron, 3-Piece
- Flow Rate: 74 gpm
- Voltage Rating: 115
- Phase: 1
Bell & Gossett in-line three-piece booster pumps are designed for hydronic systems. Series 100 and HV are Listed with Underwriter's Laboratories.
- Features
- Standards & Approvals
- Application
| The heart of the booster. The finest circulator motor available. Sleeve bearing, oil lubricated with replaceable resilient motor mounts. B&G motors are designed and manufactured specifically for the B&G boosters. |
| Noise dampening coupler. B&G’s own flexible spring design adds to quiet operation. Do not accept a substitute. |
| Long bronze sleeve bearings maintain exact shaft alignment. Provides for constant circulation of oil over bearing surfaces. |
| Precision ground pump shaft is oversized to provide large bearing surfaces. Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life. |
| The B&G mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems. |
| Centrifugal impeller prevents accumulation of air at seal faces to assure long life. Close impeller/body tolerances minimize water slippage and maximize efficiency. |
| Drip proof motors |
| Recommended for indoor use only |
| Model 2 NFI |
| CSA Certified |
| cUL/UL Listed |
| SA Registered |
| For hydronic heating and cooling systems, domestic water and industrial applications |