if (this.Model.StructuredPageData.IsNotBlank() && (this.Model.StructuredPageData.IndexOf(availabilityKey) != -1 || this.Model.StructuredPageData.IndexOf(priceKey) != -1))
{
this.Model.StructuredPageData = string.Empty;
//}
}
Holdrite 110-S-1/2 Bracket, 25 lb, Cold Rolled Steel, Copper-Bonded
HOLDRITE 110-S-1/2" COPPER PLATED BRACKET FOR 1/2"
Pipe Support Brackets
}
Brand: 
Holdrite 110-S-1/2 Bracket, 25 lb, Cold Rolled Steel, Copper-Bonded
626355
MFG #: 110-S-1/2"
Product ID:626355
Famous Supply
- Dimensions: 9.31 in L x 2 in W
- Thickness: 16 ga
- Load Capacity: 25 lb
- Material: Cold Rolled Steel
- Finish: Copper-Bonded™
The HOLDRITE® #110-S-1/2 is a Copper-Bonded™ and available with 1/2 in notches on 1 in centers. This brackets mounts directly to a horizontal or vertical pipe, and is designed to position water supplies for lavatories, and other fixtures. Packaged with a self-locking 4 in stainless steel band and self-adhesive isolation felt; solder the pipe directly to the #110-S to set 4 in, 6 in and 8 in centers. Heat the pipe, not the bracket.
- Features
- Standards & Approvals
- Application
| Heavy-gauge steel bracket |
| For 1/2 in copper tubing on 4, 6 and 8 in centers |
| Install directly to the waste/vent pipe prior to studs being erected |
| Easy pre-fabrication at the shop or on the job site |
| For use with pipe size 1/2 in CTS |
| BAA Compliant |
| IAPMO/IPC/UPC Listed |
| Sink, Pre-fab, Pipe on Pipe Support, Lavatory |